Add Access Internet to the Phonebook

1. Double click My Computer
   Double click Dial-Up Networking
   Click More and select Edit entry and modem properties...

   

2. Select the Server tab
   In the Network Protocols
   • Check TCP/IP
   • Uncheck IPX/SPX Compatible
   • Uncheck NetBEUI
   
   Check Enable software compression
   Uncheck Enable PPP LCP extensions
   
   Click TCP/IP Settings...
   Select Server assigned IP address
   Select Specify name server address
   In the Primary DNS enter: 64.240.196.2
   In the Secondary DNS enter: 64.240.196.3
   Uncheck Use IP header compression
   Check Use deafult gateway on remote network
   Click OK
   
   
3. Select the Script tab
   Select Run this script and choose Generic Login

   

   Click Edit script...
   Scroll down looking for the following lines:
   

   ; The following two lines cause RAS to ignore all responese
   ; until the remote computer requests your login name. If the remote
   ; computer prompts you with a word other than login you must
   ; replace ogin: in the line below with the exact text the
   ; remote computer uses.

   Under this text type in:
   

   OK="ost:"
   LOOP=
   COMMAND=ppp
   

   Click File
   Click Save
   

   

   Click X at top right to exit.
   
   
   You should now be back in the Script tab
   Click OK
   
   
4. You are now ready to Dial!
   Click Dial